In Reply to: Re: transmission cross member bolts posted by Ron Sadler on March 29, 2005 at 11:59:51:
: Hi Juddy
:
I've just been out to the workshop to check the thread on the chassis
mounting brackets for the transmission. The captive nuts on my car are
3/8" UNC thread.
: Hope this helps.
: Best wishes and good luck
: Ron
Hi Ron,
Thanks
for checking out your Turner. However, neither a 3/8" UNC or UNF bolt
would thread into the weld-nuts on my chassis. I ordered some 3/8" BSF
and BSW bolts from Brtish Fasteners in New York. The 3/8" BSF bolts
threaded into the weld-nuts perfectly.
Thanks again,
Juddy