In Reply to: front suspension posted by Fred carnes on June 13, 2004 at 17:26:05:
The main thing to always be aware of if overhauling the front
suspension on a Turner BMC atany time is that the lower suspension pans
, although visually A30/35 or MG ect are actually cut away at the rear
towards the mounting points. This is to allow clearence between the
wishbone pan and chassis tube - If ever fitting new pans the New unit
MUST be ground away
prior
to installation or else it will foul and will not allow full vertical
movementof the wishbone and will cut into the chassis.